Skip to content
SOLID WORKS ClubSOLID WORKS Club

Exercises

Basic SOLIDWORKS exercises

Eighteen beginner parts, each built with a handful of features: extrudes, cuts, revolves, fillets, chamfers, shells, ribs, slots, Hole Wizard and patterns. They take 5 to 20 minutes each. Work through them in order — each one adds a command — and check every part against its mass before moving on.

Kevin Walsh Kevin Walsh Updated Checked for SOLIDWORKS 2026
Eighteen simple machined practice parts arranged in a grid

Exercise list

# Part Main commands Material Check mass
1 Base plate with four holes Extrude, cut, pattern Aluminium 6061 250.72 g
2 Chamfered bushing Extrude, chamfer Brass C26000 171.79 g
3 Stepped shaft Revolve, chamfer Mild carbon steel 443.43 g
4 Hub flange Extrude, circular pattern Aluminium 6061 439.57 g
5 Angle bracket Extrude, fillet, cut Mild carbon steel 245.28 g
6 Slotted plate Slot, cut Aluminium 6061 98.92 g
7 Hex spacer Polygon, extrude Brass C26000 98.71 g
8 Shelled cup Shell Aluminium 6061 37.90 g
9 Open box Shell Aluminium 6061 140.91 g
10 Ribbed bracket Rib Mild carbon steel 492.35 g
11 U-channel Line profile, extrude Aluminium 6061 263.25 g
12 Hub with keyway Cut, dimensions Mild carbon steel 552.80 g
13 Counterbored block Hole Wizard Aluminium 6061 234.33 g
14 T-bar Profile, relations Aluminium 6061 217.73 g
15 Grooved pin Revolve, chamfer Mild carbon steel 30.43 g
16 Link arm Slot, concentric Aluminium 6061 95.67 g
17 Wedge block Profile, extrude Mild carbon steel 423.90 g
18 Disk with hole pattern Circular pattern Aluminium 6061 174.37 g

All masses come from the same geometry as the STEP files and drawings. The commands are taught in the sketching and features courses; patterns and mass properties in advanced parts. The CSWA exam checks answers the same way — see the CSWA guide.

The 18 basic exercises

Frequently asked questions

What do I need to know before these exercises?

+

The basics of sketching and the features course: extrude, cut, revolve, fillet, chamfer, shell and patterns.

Which materials are used?

+

Aluminium 6061 (2.70 g/cm³), mild carbon steel (7.85 g/cm³) and brass C26000 (8.53 g/cm³). Use the density given on each page.

How accurate should my mass be?

+

It should match to the second decimal if the model and density are right. Small differences point to a missing fillet, chamfer or hole.