Skip to content
SOLID WORKS ClubSOLID WORKS Club

Certification

CSWA exam guide: format, cost and how to prepare

The CSWA — now officially the SOLIDWORKS Design Associate exam — is the entry-level SOLIDWORKS certification. It costs $99, lasts 3 hours, needs 70% to pass and is taken online on your own computer with SOLIDWORKS 2011 or later. Most questions ask you to model a part or assembly from a drawing and report its mass, so accurate modelling and units matter more than memorising menus.

Kevin Walsh Kevin Walsh Updated Checked for SOLIDWORKS 2026
Candidate taking the CSWA exam at home with a drawing on one screen and a 3D model on the other

CSWA at a glance

CSWA (Design Associate)
Price $99 per attempt (North America)
Duration 3 hours — cannot be paused
Passing score 70%
SOLIDWORKS version SOLIDWORKS 2011 or later, installed on your computer
Where Online, through the 3DEXPERIENCE Certification Center (TesterPRO client or web client)
Languages 15
Retakes After 14 days, unlimited, each with a new credit
Result Certificate with QR code, online verification, Credly badge

Sources: official CSWA page and program FAQ, checked 2026-11-06.

What the exam covers

Chart of CSWA exam sections and points — drafting, basic, intermediate and advanced parts, and assemblies
The academic CSWA layout — 14 questions, 240 points.

The official topic list includes sketch entities and relations, boss and cut features, fillets and chamfers, patterns, dimensions, mass properties, materials, inserting components, standard mates, reference geometry, drawing views and annotations. The commercial page does not publish question counts; the academic version is laid out like this:

Section Questions Points
Drafting competencies 3 5 each
Basic part creation and modification 2 15 each
Intermediate part creation and modification 2 15 each
Advanced part creation and modification 3 15 each
Assembly creation and modification 4 30 each

Total: 14 questions, 240 points, pass 165 of 240, 180 minutes (or two 90-minute parts) (academic page, Javelin). Assemblies carry half the points, so practise them most. Examples of each section are on CSWA sample questions.

How the questions work

  • The first question of a section is usually multiple choice; follow-up "modify the design" questions take a numeric answer — typically mass in grams with two decimals.
  • There is no partial credit: a wrong model gives a wrong number.
  • If your result is not within about 1% of an option, recheck the model.
  • Units are MMGS unless stated, with a point as the decimal separator.
  • Apply the material and density given in the question; centre-of-mass questions may need a new coordinate system.

These rules come from the official CSWA exam lessons on the SOLIDWORKS blog. Why scores fall short is covered in the passing score.

How to get an exam credit

You are Route
Anyone Buy a credit for $99; credits do not expire until used
SOLIDWORKS subscription customer Up to 3 exams twice a year per seat, Associate and Professional levels (offer)
Student with Design Premium ($60/yr) CSWA and CSWP included (students)
Student at an Academic Certification Provider Free, proctored at school (academic certification)

Dassault also runs free certification weeks for students — in 2026 it was May 11–13 (announcement).

A two-week study plan

  1. Days 1–4: finish the in-product SOLIDWORKS tutorials for parts, assemblies and drawings, and the official CSWA prep course.
  2. Days 5–8: model parts from drawings against the clock; check every mass with the mass calculator.
  3. Days 9–11: take our CSWA practice test, then the official sample exam under exam conditions.
  4. Days 12–14: drill assemblies and drawing-view questions; review mistakes.

Next step after passing: CSWA vs CSWP and the CSWP guide.

Starting from zero? Our 30-day learning plan ends with the CSWA.

The exam's part questions use Extrude, Revolve, Fillet and the Hole Wizard — see the features course.

The exam's assembly questions are worth half the points — practise with the assemblies course. The topic list also includes drawing views and annotations — see the drawings course.

Preparing: the best free and paid prep is compared in SOLIDWORKS courses and books.

Frequently asked questions

How much does the CSWA exam cost?

+

$99 in North America for one attempt. Subscription customers can get free exam vouchers, and SOLIDWORKS Design Premium for Students ($60 a year) includes CSWA and CSWP. Students at schools that are Academic Certification Providers can take it free.

How long is the CSWA exam?

+

3 hours. The academic version can also be taken as two 90-minute parts. The exam cannot be paused; it ends when time runs out.

Can I retake the CSWA if I fail?

+

Yes. You must wait at least 14 days, and each attempt needs a new exam credit. There is no limit on the number of retakes.

Do I need my own copy of SOLIDWORKS?

+

Yes. The exam runs in Dassault's tester software on any computer that has SOLIDWORKS (2011 or later) and an internet connection. The free student edition or a Makers licence works for practice.

Is the CSWA hard?

+

It is designed for users new to SOLIDWORKS, but it is timed and gives no partial credit. With basic modelling skills and a few timed practice runs, most learners pass; careless units and wrong densities are the most common reasons for failing.