Intermediate assembly 18
Intermediate exercise 18: Bracket pair assembly
Two steel angle brackets from basic exercise 5 on the aluminium base plate, uprights flush with the plate's ends and facing each other. Mirror-image placement is the point of the exercise.

- Level
- Intermediate
- Time
- 15 min
- Material
- Per component (see parts list)
- Check mass
- 741.28 g total
The drawing
Parts list
| Part | Qty | Material | Exercise |
|---|---|---|---|
| Base plate with four holes | 1 | Aluminium 6061 | model it |
| Angle bracket | 2 | Mild carbon steel | model it |
What you practise
- Coincident and flush mates
- Placing the same part twice in opposite directions
- Centre of mass of a symmetric assembly
How to approach it
- Base plate fixed at the origin, bottom face on the Top plane.
- Bracket 1: base underside on the plate top, upright outer face flush with the left end face, centred on the plate depth.
- Bracket 2: the same on the right, rotated 180° so the uprights face each other — the two bracket bases meet in the middle.
Check your result
Give every part the material from the parts list, then open Evaluate → Mass Properties in the assembly. The total mass should be 741.28 g. By symmetry the centre of mass is centred in plan; it is 17.62 mm above the plate's bottom face. Mass Properties reports the centre of mass in the assembly's coordinate system; with the first part's origin at the base and its bottom face on the Top plane, the height above the base is the Y value. The CSWA asks the same kind of question — see the practice test.
Next: intermediate exercise 19.
Download files
Commands used
Show solution
- Insert base-plate (fixed).
- Bracket 1: Coincident (bracket base underside, plate top), Coincident (upright outer face, plate left end), Width (bracket sides, plate front/back).
- Bracket 2: the same mates on the right end, upright facing inward.
- Mass = 250.72 + 2 × 245.28 = 741.28 g.
Frequently asked questions
How do I centre the bracket on the plate depth?
+
Use a Width mate between the bracket's side faces and the plate's front and back faces, or coincide the bracket's mid-plane with the plate's Front plane.
Related
- Intermediate exercise 19: Shaft in pillow blocks assemblyIntermediate SOLIDWORKS exercise 19, shaft in pillow blocks assembly: concentric mates between a shaft and bores. Drawing, STEP file and check mass 1,754.40 g.
- Intermediate exercise 17: Spacer stack assemblyIntermediate SOLIDWORKS exercise 17, spacer stack assembly: inserting the first component fixed at the origin. Drawing, STEP file and check mass 645.55 g.
- SOLIDWORKS standard matesHow to use SOLIDWORKS standard mates: coincident, parallel, perpendicular, tangent, concentric, lock, distance and angle, Quick Mates and lock rotation.
- Free CSWA practice testFree CSWA-style practice test with a 45-minute timer — knowledge questions plus five modelling problems with drawings, scored with worked answers.