Intermediate exercise 9
Intermediate exercise 9: Bottle
An aluminium bottle: a revolved body with a rounded shoulder and a neck, shelled to 1.5 mm with an open top. Revolve plus shell is how most containers start.

- Level
- Intermediate
- Time
- 20 min
- Material
- Aluminium 6061, 2.70 g/cm³
- Check mass
- 107.26 g
The drawing
What you practise
- Revolve with a tangent arc
- Shell with one open face
- Thin-wall mass check
How to approach it
- Front plane half profile: radius 30 up to 100, R18 arc centred on the neck line at 100 high, neck radius 12 up to 140.
- Revolve 360°.
- Shell 1.5, remove the top face of the neck.
Check your result
Apply Aluminium 6061 or a custom material with 2.70 g/cm³, then open Evaluate → Mass Properties. The mass should be 107.26 g (volume 39,724.71 mm³). Off by 1,000? Check the density units with the mass calculator.
Next: intermediate exercise 10.
Download files
Commands used
Show solution
- Half profile with a quarter arc R18 from (30, 100) to (12, 118), centre (12, 100).
- Revolve.
- Shell 1.5, top face removed.
Frequently asked questions
Can I shell a revolved part with a neck?
+
Yes. Shell keeps the outside and offsets inward; the neck becomes a 1.5 mm wall tube.
Related
- Intermediate exercise 10: Fluted knobIntermediate SOLIDWORKS exercise 10, fluted knob: cutting one flute and patterning it. Drawing, STEP file and check mass 62.67 g.
- Intermediate exercise 8: Lofted hopperIntermediate SOLIDWORKS exercise 8, lofted hopper: loft between two parallel profiles. Drawing, STEP file and check mass 51.84 g.
- SOLIDWORKS RevolveHow to use Revolved Boss/Base and Revolved Cut in SOLIDWORKS: sketch half a profile, choose the axis, set the angle and fix open-sketch errors.
- Mass calculator for SOLIDWORKS and CSWA problemsCalculate part mass from volume and density in mm, cm, m or inches, with typical densities for steel, aluminium, brass and copper. Built for CSWA checks.