Skip to content
SOLID WORKS ClubSOLID WORKS Club

Assemblies · Lesson 14

SOLIDWORKS SpeedPak

A SpeedPak is a special configuration of a subassembly that keeps only the faces and bodies you choose for mating and shows the rest as graphics. In the top-level assembly the subassembly then loads and rebuilds like a much simpler part. It is the tool for big purchased modules, machine sections and anything you need to see but not edit.

Kevin Walsh Kevin Walsh Updated Checked for SOLIDWORKS 2026
Detailed subassembly shown as ghosted graphics with a few highlighted mating faces kept as geometry

Where to find it

ConfigurationManager → right-click a configuration → Add SpeedPak

SpeedPak options

Option What it does
Include faces / bodies Keeps them as real, selectable geometry
Quick Include / body slider Adds faces or bodies automatically by size
Remove ghost Hides the graphics-only remainder
Create Mated / Graphics SpeedPak From the parent: keep mated faces, or graphics only

Version notes

Version Change
2017 Sketches and reference geometry can be included
2018 SpeedPaks update automatically on save
2025 SpeedPaks can be created from the top-level assembly

More ways to keep big assemblies fast are in large assemblies.

Step by step

  1. 1

    Open the subassembly

    Open the plate-and-pins subassembly from the subassemblies lesson on its own.

  2. 2

    Add a SpeedPak

    ConfigurationManager → right-click the configuration → Add SpeedPak. Its name gets _speedpak at the end.

  3. 3

    Choose what to keep

    In Include, pick the faces you will mate to in the parent — the plate's bottom face and one side face. Use the body slider or Quick Include for more. Confirm.

    SpeedPak PropertyManager with two plate faces included and the rest shown as graphics
    Include only the faces you need for mating.
  4. 4

    Use it in the parent

    In the top-level assembly, select the subassembly and switch its configuration to the SpeedPak one (or right-click → SpeedPak Options). Only the included faces can be selected for mating.

Common mistakes

  • Forgetting to include a face you need for mating — only included items can be selected. Edit the SpeedPak and add it.
  • Using SpeedPak on subassemblies you are still designing. It is for stable components.

Lesson 14 of 16 in the assemblies course.

Practice

Create a SpeedPak of the plate-and-pins subassembly including only the plate's bottom face and one side face. Check: in the parent assembly you can mate to those two faces, but selecting a pin face does nothing — it is graphics only.

Sources

Checked November 2026. SOLID WORKS Club is independent; menu names can differ slightly between releases.

Frequently asked questions

What is a SpeedPak in SOLIDWORKS?

+

A simplified configuration of an assembly that keeps only selected faces and bodies as real geometry and shows the rest as graphics, so it loads and rebuilds faster in a parent assembly.

How do I create a SpeedPak?

+

Right-click a configuration in the ConfigurationManager and choose Add SpeedPak, then pick the faces and bodies to include.

What is a graphics SpeedPak?

+

A SpeedPak created from the parent assembly with no included geometry — graphics only, for components you only need to see.

What changed for SpeedPak recently?

+

In 2017 sketches and reference geometry could be included, in 2018 SpeedPaks update automatically on save, and in 2025 they can be created from the top-level assembly.