Skip to content
SOLID WORKS ClubSOLID WORKS Club

Assemblies · Lesson 10

SOLIDWORKS subassemblies

A subassembly is an assembly used as one component inside another. Group parts the way they are built and bought — a motor with its bracket, a wheel with its bearings — and the top-level assembly gets fewer components and fewer mates, rebuilds faster and produces a cleaner BOM. Subassemblies are rigid by default; make one flexible when its parts must move in the top-level assembly.

Kevin Walsh Kevin Walsh Updated Checked for SOLIDWORKS 2026
Assembly tree grouped into subassemblies with matching coloured groups in the 3D model

Where to find it

Select components → right-click → Form New Subassembly

Subassembly commands

Command What it does
Form New Subassembly Moves selected components into a new subassembly
Insert Components → New Assembly Creates an empty virtual subassembly
Save Assembly (in External File) Saves a virtual subassembly as its own file
Make Subassembly Flexible / Rigid Solves its mates in the parent, or as one unit
Dissolve Subassembly Moves components up into the parent

A flexible subassembly must be resolved, not lightweight. How subassemblies show in parts lists is covered in BOM.

Step by step

  1. 1

    Select the components

    In the plate-and-pins assembly, Ctrl-select the plate and both pins in the FeatureManager tree. They must all be at the same level.

  2. 2

    Form the subassembly

    Right-click → Form New Subassembly. A new subassembly appears in the tree with the three parts and their mates inside it. It is virtual — stored inside the parent — until you save it.

    Right-click menu with Form New Subassembly on three selected components
    Select components at the same level and form a new subassembly.
  3. 3

    Save it as its own file

    Right-click the subassembly → Save Assembly (in External File) and give it a name.

  4. 4

    Make it flexible if needed

    If the pins should move in the parent assembly, right-click the subassembly → Make Subassembly Flexible (or Component Properties → Solve as Flexible). Leave it rigid otherwise — rigid is faster.

Common mistakes

  • Form New Subassembly greyed out — the selected components are at different levels of the tree.
  • Making every subassembly flexible. Flexible subassemblies are solved in the parent and can slow it down a lot.
  • One huge flat assembly with hundreds of top-level mates. Group parts into subassemblies.

Lesson 10 of 16 in the assemblies course.

Practice

Turn the plate and both pins into a saved subassembly and insert it twice into a new assembly. Check: a top-level BOM lists the subassembly with quantity 2; a parts-only BOM lists the plate × 2 and the pin × 4.

Sources

Checked November 2026. SOLID WORKS Club is independent; menu names can differ slightly between releases.

Frequently asked questions

How do I create a subassembly in SOLIDWORKS?

+

Select components at the same level, right-click and choose Form New Subassembly. Or use Insert Components → New Assembly for an empty virtual subassembly.

What is a flexible subassembly?

+

A subassembly whose own mates are solved in the parent assembly, so its parts can move there — for example a hinge or a cylinder. Rigid is the default and is faster.

How do I remove a subassembly level?

+

Right-click the subassembly and choose Dissolve Subassembly. Its components move up into the parent.

Do subassemblies make SOLIDWORKS faster?

+

Yes, usually. Fewer top-level mates mean faster rebuilds, and rigid subassemblies are solved as one unit.