Reference
How to export IGES from SOLIDWORKS
Choose File → Save As, select IGES (*.igs), check the Options if the recipient has special requirements, and save. IGES is an older neutral format that mainly carries surfaces; most modern systems handle STEP or Parasolid better. Use IGES only when the other side asks for it — typically older CAM, CAE or surfacing software.

Where to find it
File → Save As → Save as type → IGES (*.igs)
When IGES still makes sense
- The recipient's CAM, CAE or surfacing software only reads IGES.
- You are exchanging surfaces or curves rather than closed solids.
- A customer specification requires it.
In every other case use STEP (or Parasolid for Parasolid-based systems), which the official import/export table lists alongside IGES. IGES files up to version 5.3 can also be opened through 3D Interconnect.
Neutral formats compared
| IGES | STEP | Parasolid | |
|---|---|---|---|
| Solids | Often as separate faces | Yes | Yes |
| Surfaces and curves | Yes | Yes | Yes |
| Assembly structure | Limited | Yes | Yes |
| Colours | Basic | AP214 and newer | Yes |
| Best for | Legacy systems | Most exchanges | Parasolid-based CAD |
All formats are listed in SOLIDWORKS file formats. For 3D printing, use STL or 3MF.
Step by step
-
1
Ask what the recipient needs
Confirm they really need IGES. If their software reads STEP or Parasolid, send that instead — solids transfer more reliably.
-
2
Save As IGES
Choose File → Save As, select IGES (*.igs) and click Options to match any requirements from the recipient (for example surfaces or curves only).
-
3
Check the result
Reopen the IGES file in SOLIDWORKS or eDrawings. Look for missing faces or gaps, which are common in surface exports.
Common mistakes
- Choosing IGES out of habit when STEP would carry a cleaner solid.
- Not checking for gaps — IGES surfaces may need knitting into a solid on import.
- Sending a huge IGES of an assembly instead of separate files or STEP.
Frequently asked questions
Is IGES or STEP better?
+
For solid models, STEP. IGES was designed around surfaces and curves and often arrives as separate faces that need stitching. STEP and Parasolid transfer closed solids more reliably.
How do I turn an imported IGES file into a solid?
+
If the surfaces form a closed volume, use Knit Surface with the option to create a solid, after fixing any gaps. Import options in SOLIDWORKS also try to knit surfaces into solids automatically.
Related
- How to export SOLIDWORKS to STEPHow to save a SOLIDWORKS part or assembly as STEP, which AP version to choose (AP203, AP214, AP242), exporting components separately, and pitfalls.
- SOLIDWORKS file formats and extensionsEvery SOLIDWORKS file extension explained — SLDPRT, SLDASM, SLDDRW, templates, libraries and tables — plus the import and export formats and 3D Interconnect.
- How to export STL from SOLIDWORKS for 3D printingHow to save a SOLIDWORKS part or assembly as STL for 3D printing — resolution, deviation and angle, units, one file for assemblies — and 3MF instead.
- What is an SLDPRT file?An SLDPRT file is a SOLIDWORKS part. How to open it with or without SOLIDWORKS, which versions can read it, and how to convert SLDPRT to STEP, STL or DXF.