Skip to content
SOLID WORKS ClubSOLID WORKS Club

Assemblies · Lesson 5

SOLIDWORKS SmartMates and Smart Fasteners

SmartMates add mates by dragging: hold Alt and drag an edge or face of one component onto another, and SOLIDWORKS picks the mates from what you touched. Drop a pin's circular edge onto a hole edge and you get concentric and coincident in one move. Smart Fasteners go further: they read Hole Wizard holes and fill them with correctly sized Toolbox bolts, already mated.

Kevin Walsh Kevin Walsh Updated Checked for SOLIDWORKS 2026
Pin being Alt-dragged into a hole with a SmartMate icon at the pointer

Where to find it

Alt + drag a component edge or face onto another; Assembly tab → Smart Fasteners

What SmartMates create

You drag Onto Mates added
Planar face, edge, vertex Matching entity Coincident
Cylindrical or conical face Matching face Concentric
Circular edge (peg) Circular edge (hole) Concentric + Coincident
Circular edge of a flange Matching flange edge Concentric + Coincident

Smart Fasteners

Step Detail
Requirements Toolbox (Professional or Premium), Hole Wizard holes
Add Select holes, a face or a component; Add or Populate All
Stack Washers and nuts at the top or bottom (blind holes: top only)
Since 2019 Option to lock rotation of concentric mates to Toolbox parts

To make components snap into place even without Alt, give them mate references.

Step by step

  1. 1

    Start with a loose pin

    In the plate-and-pins assembly, delete the mates of one pin so it floats again (or insert a new pin).

  2. 2

    Alt-drag the edge

    Start dragging the circular edge at the end of the pin, then press Alt while dragging. Move it over the edge of a hole: the pointer shows a SmartMate icon and the pin snaps into place.

    Alt-drag of a pin's circular edge onto a hole edge showing the SmartMate pointer
    Drag the circular edge, press Alt, and drop it on the hole edge.
  3. 3

    Drop it and flip if needed

    Release the mouse. Concentric and coincident mates are added. If the pin faces the wrong way, press Tab before releasing.

  4. 4

    Smart Fasteners (Professional or Premium)

    In a part with Hole Wizard holes, Assembly tab → Smart Fasteners, select the holes or the face, click Add or Populate All. Fasteners sized to the holes are inserted and mated.

Common mistakes

  • Pressing Alt before starting the drag — press it during the drag.
  • {'Dragging a face when you wanted an edge': 'faces give a single coincident or concentric mate, circular edges give two.'}
  • Smart Fasteners on holes not made with the Hole Wizard — they get a default fastener, not one matched to the hole.

Lesson 5 of 16 in the assemblies course.

Practice

Alt-drag both pins into the plate's holes. Check: the Mates folder gains two mates per pin (concentric and coincident), and each pin still shows (-) because it can spin.

Sources

Checked November 2026. SOLID WORKS Club is independent; menu names can differ slightly between releases.

Frequently asked questions

How do I use SmartMates?

+

Drag an edge or face of a component and press Alt while dragging, then drop it on the matching entity of another component. Tab flips the alignment.

Which mates does a SmartMate create?

+

Planar faces, edges and vertices give coincident; cylindrical and conical faces give concentric; circular edges, such as a peg into a hole, give concentric and coincident together.

What are Smart Fasteners?

+

A Toolbox tool in SOLIDWORKS Professional and Premium that reads Hole Wizard holes and adds correctly sized, mated fasteners.

Can I change how sensitive SmartMates are?

+

Yes, under System Options → Performance → SmartMate sensitivity.