Skip to content
SOLID WORKS ClubSOLID WORKS Club

Errors & Fixes

SOLIDWORKS file is read-only — why and how to fix it

SOLIDWORKS opens a file read-only when someone else already has write access to it, when Windows marks it read-only, or when your PDM vault has not checked it out to you. On shared network folders the first person to open an assembly gets write access to it and to every part it uses — so a colleague's open assembly is the usual reason your part is read-only.

Kevin Walsh Kevin Walsh Updated Checked for SOLIDWORKS 2026
Two engineers sharing a network folder with a padlock on a CAD part file
The file is open read-only — another user has write access, or the file is marked read-only.

Applies to: SOLIDWORKS 2018–2027 on shared folders and with SOLIDWORKS PDM.

Most likely causes

  1. Someone else opened the file, or an assembly that uses it, first (most common)
  2. The Windows Read-only attribute is set on the file (common)
  3. PDM: the file is not checked out to you (PDM users)
  4. PDM and SOLIDWORKS locks disagree after a check-out (PDM users)
  5. You opened it with Open Read-only, or references open read-only by option (occasional)

Two kinds of read-only

SOLIDWORKS read-only Windows read-only attribute
Where it comes from Someone else has write access, Open Read-only, PDM File Properties → Read-only
Can you save over it? Yes, after a warning No
How to clear it Get Write Access / Reload when it is free Clear the box in Properties

Working on a shared folder without PDM

Collaboration options with the multi-user environment check boxes enabled
The multi-user options add Get Write Access and Make Read-Only.
  1. Everybody turns on the multi-user environment options.
  2. Open referenced parts read-only by default, so opening an assembly does not lock every part for colleagues.
  3. When you need to edit a part, Get Write Access; when you are done, Make Read-Only to hand it back.
  4. Use Reload before saving if you see the "modified by another user" icon.

The SOLIDWORKS Tech Blog and TriMech both describe these options as a workaround: for a team working on the same files every day, a vault — SOLIDWORKS PDM — handles locking and version history properly.

Saving fails even with write access? See save errors. For keeping project files tidy in the first place, see file and folder setup.

Fixes, in order

  1. 1. Find out who has it open

    On a shared folder only one person can save a file at a time. Ask whoever has the assembly open to close it — or to release the part with Make Read-Only (see the multi-user options below).

  2. 2. Clear the Windows read-only flag

    In File Explorer, right-click the file → Properties and clear Read-only. Unlike SOLIDWORKS' own read-only mode, this attribute really blocks saving.

  3. 3. Turn on the multi-user environment

    Tools → Options → System Options → Collaboration → Enable multi-user environment and Add shortcut menu items for multi-user environment. You get Get Write Access and Make Read-Only in the File menu and on components' right-click menus.

  4. 4. Get write access when it is free

    When the other person has closed the file, use File → Get Write Access (parts) or right-click the component → Get Write Access. File → Reload first checks whether a newer copy was saved, so you do not overwrite their changes.

  5. 5. Let SOLIDWORKS tell you about changes

    Check if files opened read-only have been modified by other users checks your read-only files every few minutes and shows a status-bar icon that opens the Reload dialog. Lightweight components are not checked.

  6. 6. PDM — check the file out

    In a PDM vault a file is read-only until you check it out. If it is checked out but SOLIDWORKS still says read-only, GoEngineer's fix is to enable the multi-user options above and use Get Write Access; failing that, clear the Windows read-only flag.

  7. 7. Check the External References options

    System Options → External References → Open referenced documents with read-only access deliberately opens parts read-only so others can edit them. Turn it off if you are the only user.

Sources

Checked November 2026. SOLID WORKS Club is independent; menu names can differ slightly between releases.

Frequently asked questions

Why does SOLIDWORKS open my part as read-only?

+

Usually because someone else has it — or an assembly that uses it — open with write access. It can also be the Windows read-only flag or a PDM file that is not checked out to you.

Can I save over a file opened read-only?

+

SOLIDWORKS warns you but lets you overwrite a file it opened read-only, which can wipe out a colleague's changes. The Windows read-only attribute, in contrast, blocks the save.

Where is Get Write Access?

+

In the File menu for parts and on the right-click menu of assembly components, once the multi-user options in System Options → Collaboration are turned on.