Skip to content
SOLID WORKS ClubSOLID WORKS Club

Certification

Surfacing exam (CSWP-SU, formerly CSWPA-SU)

The SOLIDWORKS surfacing exam — now CSWP-SU, formerly CSWPA-SU — tests free-form modelling with surfaces. It costs $20, lasts 90 minutes, needs 75% to pass and requires SOLIDWORKS 2017 or later. Topics include splines and 3D curves; boundary, loft, filled, swept, planar, ruled and offset surfaces; trim, extend, knit, thicken and split. It counts toward the CSWE.

Kevin Walsh Kevin Walsh Updated Checked for SOLIDWORKS 2026
Curved product shell built from surface patches with visible boundaries, for the SOLIDWORKS surfacing exam

Exam facts

Surfacing exam
Code CSWP-SU (formerly CSWPA-SU)
Price $20
Time 90 min
Pass mark 75%
SOLIDWORKS version 2017+
Retake After 14 days, new credit

Source: official surfacing exam page, checked 2026-11-06. Official sample exam (ZIP).

Topics

  • Splines and 3D curves
  • Boundary, loft, filled, swept, planar, ruled and offset surfaces
  • Trim and untrim; extend
  • Knit surfaces (into solids) and thicken
  • Split lines and split bodies

Preparation tips

  • Work through our free surfacing course — every lesson ends with an area or volume check.
  • Build closed volumes from surfaces and knit them into a solid — mass answers need a solid body.
  • Learn when a boundary surface beats a loft, and how curvature-continuous edges are set.
  • Practise repairing gaps in imported surface models; it is a common real-world task, often with IGES files.
  • If surfacing is your main job, compare SOLIDWORKS with dedicated free-form tools in SOLIDWORKS vs Rhino.

Other specialist exams: sheet metal and weldments; the full ladder is on the CSWE page.

Frequently asked questions

Is the surfacing exam hard?

+

It depends on your experience. Surface modelling is used less than solid modelling in everyday mechanical design, so most candidates need dedicated practice — especially turning surfaces into watertight solids with knit and thicken.

Which SOLIDWORKS version do I need for the surfacing exam?

+

SOLIDWORKS 2017 or later, according to the official exam page.